The “WS RETROFIT FOR EL-ITP-12-WH/BK” is an adapter for in-wall nearly flush retrofit installation of an EL-ITP-12-WH/BK touch panel. The “WS RETROFIT FOR EL-ITP-12-WH/BK” firmly mounts the EL-ITP-12-WH/BK touch panel while allowing easy insertion, removal and operation.
Features
- Nearly flush with the wall (4mm [0.16”] thick on-wall bezel).
-
Allows easy insertion and removal of the touch panel.
-
Wall mount contains depth calibration screws.
-
Wall board thickness 10mm [0.39"] up to 22mm [0.86"]. For boards up to 32mm [1.25"] thick, reinstall cam latches upside down.
-
Bezel attaches magnetically to the retrofit wall mount base.
-
The bezel is supplied painted black.
-
Designed for the use with EL-ITP-12-WH/BK touch panel (by ELAN) (touch panel is not included).
-
Adapter kit contains: 1. (X1) Wall mount base; 2. (X1) Bezel; 3. (X1) Touch panel adapter 4. (X4) M4 nuts 5. (X4) M4x12 Screws