Route four 4K 60 Hz 4:4:4 sources to any combination of up to four 4K 60 Hz 4:4:4
displays
Reinforcing its commitment to provide commercial integrators with cutting-edge
audio/video signal processing solutions, Gefen’s 4K Ultra HD 600 MHz 4x4
Matrix for HDMI supports 18.2 Gbps of bandwidth and 600 MHz TMDS Clock frequency,
the highest specified under the HDMI 2.0 standard.
Full bandwidth support allows the EXT-UHD600A-44 to accommodate resolutions up to
4K Cinema-DCI (4096 x 2160 up to 60 Hz 4:4:4), and 4K Ultra HD (3860 x 2160 up to 60
Hz, 4:4:4) along with HDR (High Dynamic Range). HDCP 2.2 and the legacy HDCP 1.4
content protection algorithms are supported. The Gefen 4x4 Matrix also supports
1080p Full HD, 1920 x 1200 (WUXGA), 3DTV, and Deep Color (up to 1080p resolution).
In addition to its full HDMI 2.0 and HDR compliance, this product incorporates
new features that enhance the commercial integrator’s experience. Recognizing
that audio is just as important as video, it features analog and digital audio
outputs that break out the audio stream (2 channel analog, 2 channel PCM, and up to
5.1 channel Bitstream) from each HDMI source, allowing the de-embedded audio content
to be sent to external amplifiers and music distribution systems for added impact in
bars, restaurants, clubs, venues, and corporate offices. In addition, highest
performance multichannel digital audio including 7.1 channels of LPCM and HBR (High
Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD,
DTS:X™, and DTS-HD Master Audio™ are passed through from the sources to
the HDMI outputs.
Thanks to independent scalers built into each output, two of the outputs on the
EXT-UHD600A-44 can downscale a 4K signal to 1080p Full HD, while the other two
outputs can upscale an HD signal to 4K Ultra HD, maximizing compatibility in a mixed
resolution display system. 2 USB ports have been included on the back panel to
supply power to sources such as streaming sticks. A comprehensive API facilitates
enhanced functionality with third-party control systems, creating exciting interface
possibilities. Gefen’s Long Range Power (LRP) feature provides extra current
through the HDMI connector, and eliminates the need for an external power supply
when using a compatible product.
This matrix has been designed to work with the Gefen Syner-G™ software to
simplify initial IP configuration and EDID Management. Each source can be routed to
any or all displays, using the front-panel push buttons or the included handheld IR
Remote Control. The matrix can also be controlled via RS-232, Telnet, UDP, and
Gefen’s intuitive and easy-to-use web server interface. The Gefen EXT-UHD600A-
44 matrix features a 1U tall, rack-mountable enclosure that can also be placed on a
shelf. It accommodates Gefen locking HDMI cables to ensure secure connections.
Features:
- Routes four 4K sources to four 4K displays
- Supports resolutions up to 4K Cinema-DCI (4096 x 2160 up to 60 Hz, 4:4:4), 4K
Ultra HD (3860 x 2160 up to 60 Hz, 4:4:4) with HDR, 1080p Full HD, and WUXGA
(1920x1200)
- Supports HDCP 2.2 and 1.4
- Supports HDR (High Dynamic Range) 10-bit Deep Color at 4K 60 Hz 4:2:0 and 4K 24
Hz 4:4:4
- Supports 12-bit Deep Color at 1080p Full HD (60 Hz 4:4:4)
- 3DTV pass-through
- Lip Sync pass-through
- EDID Management for rapid integration of source and displays
- Supports uncompressed LPCM digital audio up to 7.1 channels
- Supports up to 7.1 channels of HBR (High Bit Rate) digital audio including Dolby
Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™
- Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA
(1920x1200), with Gefen CAB-DVI2-HDMI-LCK DVI-to-HDMI cables (not included)
- Built-in Audio De-Embedders break out 2 channel analog, 2 channel PCM, and up to
5.1 channels of Bitstream audio from each HDMI output, allowing the audio content to
be sent to external amplifiers and music distribution systems for added
impact.
- 4 independent scalers allow upscaling from 1080p to 4K on two outputs and
downscaling from 4K to 1080p on the other two, maximizing compatibility in a mixed-
resolution display system
- 2 USB power ports for use with sources requiring a USB power supply.
- Enhanced API facilitates added functionality with third-party control systems.
- Long Reach Power (LRP) provides 500 mA at 5V on pin 18 of HDMI outputs 1 and 2.
Enables select extender devices to be powered through their HDMI input port
- Locking power connector
- Push button controls
- RS-232 Serial control interface for use with a third-party controller
- IP control via Telnet, UDP, and the built-in web server interface
- IR remote control
- Gefen Syner-G™ software simplifies initial IP configuration and EDID
Management
- Field-updatable firmware via web server interface
- 1 U tall enclosure, rack ears included
- Can be placed on a shelf or mounted in a standard 19-inch wide rack