AVPro Edge AC-MXNET-1G-EWP MXNet 1G Wall Plate Encoder

Clean, sleek and stable, that is what you get when you install this AV over IP encoder device that fits into any standard dual gang mud ring. Connect this MXNet wall plate to any HDMI source, and it will encode the audio/video signal into a multicast data format that can be routed to any Decoder endpoint within the project/installation. This device connects directly via category cable (CAT 6A recommended) to the any of the MXNet Switches. The AC-MXNET-EWP is a part of the MXNet family of AV-over-IP products from AVPro Edge.

The AC-MXNET-EWP will encode a full 4K 4:4:4 60Hz HDMI video signal – along with audio, control, power, and HDR metadata. These signals are passed to single or multiple Decoder endpoints via multicast routing through an MXNet or multicast compatible L3 managed network switch. It does all this with next to zero latency. MXNet Encoders encode audio/video/control signals into IP packets using an optimized JPEG2000 codec at a flexible data rate (200Mbps for 1080p content, 300Mbps for 4K30 content, 850Mbps at peak).

The AC-MXNET-EWP is designed to sleekly be mounted into walls, tables, desks or any other remote place you want to have an HDMI input to your video distribution system. With VGA and HDMI video inputs, plus the ability to bi-directionally pass USB signals this is the ideal solutions for large scale offices, educational centers, hospitality or house of worship.

Features:

• 1G Maximum Data Rate
• Bandwidth management via MXNet MENTOR
• Uses any standard category cable (CAT 5e or better)
• Wall Plate Format that fits in standard Dual Gang mud rings
• USB/KVM Host support
• Full Exterior Light Control (for discreet Installs)