SDI Amplifiers

The VM-2HD is a high-performance distribution amplifier for HD-SDI signals. It takes one input, provides reclocking and equalization and distributes the signal to two identical outputs.

The VM−4UX is a compact and high performance 1:4 4K distributor for standard broadcast−grade SDI signals of up to 12G transmitted data rate.

The VM−8UX is a compact and high performance 1:8 4K distributor for standard broadcast−grade SDI signals of up to 12G transmitted data rate.

12GDA is a miniature 1x6 12G-SDI re-clocking distribution amplifier that allows facilities to save on cable runs and install times. With support for 12G-SDI for 4K/UltraHD single link workflows, the format-agnostic device features six separately buffered SDI outputs identical to the recovered input.

The 3GDA is a miniature, low-cost 1x6 3G HD-SDI/HD-SDI/SDI re-clocking distribution amplifier. Featuring six separately buffered SDI outputs, the 3GDA provides automatic input detection, re-clocking and cable equalization.

The HD5DA is a miniature, low cost, 1x4 HD-SDI/SDI distribution amplifier/repeater. Featuring four separately buffered HD-SDI/SDI outputs, the HD5DA provides automatic input cable equalization to 100 meters and automatically adapts to 143, 177, 270,

The Apantac LLC 3G-SDI 1x4 Re-Clocking Distribution Amplifier is compatible with 3G/HD/SD-SDI and ASI signals.

The Apantac LLC 3G-SDI 1x8 Re-Clocking Distribution Amplifier is compatible with 3G/HD/SD-SDI and ASI signals

Stand alone One to Four Reclocking SDI Distribution Amplifier

High density (with HD-BNCs) openGear Rear Module for OG-DA-4HD-II-MB.

OG-DA-4HD-II-MB + OG-DA-4HD-II-RM. Occupies 2 slots in the openGear frame

OG-DA-4HD-II-SET-1: 2 x OG-DA-4HD-II-MB + OG-DA-4HD-II-RM2

openGear One to Eight Reclocking SDI Distribution Amplifier with one passive loop our

openGear Rear Module for OG-DA-4HD-MB. Occupies 2 slots in the openGear frame

OG-DA-8HD-II-SET-1: OG-DA-8HD-II-MB + OG-DA-8HD-II-RM

openGear Rear Module for OG-MiniDL-1+3-MB. Occupies 2 slots in the openGear frame

Datavideo VP-597 is a six output SDI distribution amplifier with A/B inputs switching control (non-locked). It supports 3G/HD/SD SDI video with embedded Audio and re-clock design for long distance transmission. Two source inputs can be controlled by an A/B panel switch or thru GPI remote control interface.

The 3GDA is a miniature, low-cost 1x6 3G HD-SDI/HD-SDI/SDI re-clocking distribution amplifier. Featuring six separately buffered SDI outputs, the 3GDA provides automatic input detection, re-clocking and cable equalization.

The OG-3GDA-1x9 is a state of the art, openGear compatible, 3G-SDI distribution amplifier. The incoming 3G-SDI signal is reclocked and distributed to each of the nine 3G-SDI outputs, allowing the same signal to be sent to multiple destinations simultaneously.