This listing is for IPD-SM52-
EZ-BK only. Use description below as a general
The IPD-SM52-EZ-BK is a 5.25-inch, two-directional
surface-mount speaker perfect for Internet Protocol
addressable audio networks on the Dante™ platform. It
has a single 5.25-inch polypropylene woofer as well
as one-inch soft dome tweeter put in an injection
mold. The unit extends a frequency response of 55Hz –
22kHz (-10dB) plus, uniform broad high-frequency
dispersion by implementing SoundTube’s patent
BroadBeam Ring® technology. Distributes power,
control, and audio to the device through a CAT5/CAT6
cable. The other end links to the STNet™ Switch,
which offers 40W PoE to each speaker. You can use the
software for the configuration of the speaker. If any
problems arise while utilizing the speaker, it sends
an immediate report through SoundTube® monitoring
Suitable for the indoor/damp outdoor background to
mid-way SPL surface-mount applications. The device
features a detachable mounting bracket which is
capable of pre-mounting in surface-mounting
applications. The full frequency distribution model
and high sensitivity ensure the IPD-SM52-EZ surface-
mount product is appropriate for paging and music in
the restaurant, airports, retail, amusement, hotels,
schools, and casinos.
There is a constant roll-out of new technologies
by SoundTube Entertainment and MSE Audio Group that
improves audio product performance. The several U.S
and international patents enable copyright for
SoundTube Entertainment innovations which covers
SoundTube enclosure, dispersion, and dome
technologies. MSE Audio Group puts the essential
efforts to defend its patents to protect SoundTube
end users and resellers.
SoundTube Entertainment does their possible best
to provide dealers, designers, and engineers with
whole and adequate technical information and data.
Get all data from www.soundtube.com or SoundTube
Entertainment. EASE™ Address – two-dimensional
modeling for distributed systems SoundTubeSPEC™ –
Patent speaker placement software Autodesk® Revit®
software Tech Sheets – Architectural specs and
technical info for system engineers.
The third party independently gets and verifies
every data for SoundTube speakers. Based on ASTM, ISO
and AES standards, it receives and analyzes all data
utilizing TEF, EASERA, and MLSSA. It collects full
balloon data consisting of both phase and degree into
several formats such as EASE 4.x, GLL, and CLF.
The loudspeaker comprises a 5.25-inches low-
frequency transducer as well as a 1.00-inch high-
frequency transducer plus a frequency-dividing
network set in an enclosure with vents. The low-
frequency voice coil diameter is 25.4 mm (1.00 inch).
With a silk material, construct the high-frequency
transducer and a proprietary BroadBeam Ring®
waveguide. The following shall be the execution
specifications of a standard production unit:
Frequency response available for use shall work from
55 Hz – 22 kHz (-10 dB, individually verified, half
space). Utilize 3.5 kHz crossover frequency for a
frequency-dividing network. It accommodates 40W Power
over Ethernet together with PoE+ and typical PoE,
plus the audio signal from an involved network
switch, and can be software configured. With an input
of 40W and maximum continuous output of 1 meter shall
be 101dB. Use a U-bracket for installation and safety
attachment of the speaker. Also, include and connect
a secondary cable to the speaker chassis for
protection redundancy. Employ the RJ45 Ethernet port
for external wiring input connector. Typical for
indoor or outdoor use with a weather-resistant cover
on all wire connections. Make the enclosure from
injection-molded, High Impact Poly Styrene (HIPS).
For sturdiness, make the grille from powder-coated
aluminum. Overall the maximum cabinet dimensions
should be 301.8mm(11.88 inches) in height by 190.5 mm
(7.50 inches) in width by 168.4mm (6.63 inches) in
depth (with no SM bracket). The device features Allen
wrench, port plug, and watertight strain-relief
bushing. Ideal for audio over IP Dante™
- STNet IP-addressable, self powered (PoE)
- Dante™ I/O for interconnectivity with Dante-
enable audio systems.
- BroadBeam RingTM delivers a consistent
dispersion pattern up to 10 kHz for maximum coverage
area per speaker.
- One 5.25 inch (133 mm) polypropylene woofer
and one 1.0 inch (25 mm) soft dome tweeter.
- Fast connection of power, audio and control
functions via one CAT5 or CAT6 cable.
- 40 watts PoE provided by SoundTube STNet
Switch; also works with Standar PoE plus and PoE
- Provides report-back on any problems via
- Aluminum grille with powder-coat finish.
- Vertical and horizontal mounting offer
precision aiming for indoor and outdoor
- UL 60065 listed.
- High-quality black or white paint finish.
- Included Accessories: Safety cable, wall
mount bracket, port plug, allen wrench and
watertight strain-relief bushing.