In addition to supporting 8x8 HDMI, the ANI-8-4K60-S supports Independent 8x8 audio matrix routing, in which you can route the incoming audio from any HDMI source to Analog Audio Outputs (audio remains embedded on the HDMI).
Features:
- HDMI 2.0b, HDCP 2.3/2.2/HDCP 1.x, 18Gbps uncompressed signal bandwidth
- (8) HDMI inputs,8x HDMI outputs
- (8) RCA analog audio output
- (8) 3-pin Phoenix analog audio output
- Independent video downscaling 4K-> 1080P/Bypass/HDBT mode (4K60 420)
- Dolby Vision, HDR, HDR10+ and HLG, HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD, and DTS-HD Master Audio
- CEC* control source and display, turn display device On/Off, change the input or enter a custom command
- Audio De-embedding for audio matrix(no downmix required
- Mirrored L/R audio Output via RCA or 3-pin phoenix (unbalanced)
- Advanced EDID management supported
- Independent 8x8 audio matrix, in which you can route the incoming audio from any HDMI Input to any Analog Audio Output
- Independent audio level control (0-60) and lip sync adjust (delay 0-150ms) on Analog Audio Outputs
- Internal test pattern to test the device outputs
- Audio and Video Zone mode operation
- TCP/IP, RS-232, and IR control
- Supports firmware update