Control Systems

The Atlona AT-ANC-108D is an 8-button network control panel for Atlona IP-based single output channel switchers. It is designed for easy configuration using the free Atlona Management System (AMS) software resource. Only one category cable needs to b

This keypad plugs into the UHBX-SW3-WP using a CAT5 cable and can be located up to 200 ft away at a convenient location.

This keypad plugs into the UHBX-SW3-WP using a CAT5 cable and can be located up to 200 ft away at a convenient location.

Rotary Volume Control (digital-encoder) with knob on a Decora® Wall-Plate. Works with EMX-AMP and EMX-I-AMP or any other device requiring 3 terminal digital encoder.

8-Button expansion for VSA User Interface (VSA-UI-DP). Buttons can be programmed for single action or multiple action macro. Buttons can be set for toggle mode or radio group

User Interface keypad for VSA System. Includes separate mic and source volume controls with LED bar indicator along with 8 custom programmable buttons can be configured to perform any system action or a combination of actions.

The A.I.M. management server is a control suite which transforms AdderLink Infinity extenders into a digital matrix solution.

RC4-8P8C remote control unit can be used to provide direct push button access to any channel from your desktop.

The 1T-CL-322-EU Control Panel is an easy to use cost effective Ethernet based solution for system automation and remote control

The 1T-CL-322-US Control Panel is an easy to use, cost effective Ethernet based solution for system automation and remote control. It is designed to be highly flexible but simple to install

The FC−21ETH is an Ethernet control gateway, capable of plug and play deployment over customer Ethernet LAN for remote control of customer controlled devices via bidirectional RS−232 or RS−485 serial control connections

The FC−22ETH is an Ethernet control gateway, capable of plug and play deployment over customer Ethernet LAN for remote control of customer controlled devices via bidirectional RS−232 or RS−485 serial control connections

The FC-24ETH is a bidirectional RS-232 or RS-485 to Ethernet control signal converter. It allows four RS-232 (or one RS-485 and three RS-232) controllable devices to be controlled via an Ethernet or LAN connection.

The FC-26 is a bidirectional RS-232 to Ethernet with IR control signal converter. It allows two RS-232 and four IR controllable devices to be controlled via an Ethernet or LAN connection.

The FC−28 is a bidirectional RS−232, IR control, GPI/O and relay control signal converter to Ethernet. Two RS−232, four IR, two GPI/O and two relay controllable devices can be controlled via an Ethernet or LAN connection.