The SB-5688CAP Matrix Switcher is a high-performance unit which supports eight (8)
HDMI inputs, eight (8) Auxiliary Audio Inputs, eight (8) HDMI outputs, eight (8)
SPDIF outputs, and eight (8) HDBaseT (PoH). The SB-5688CAP certifies HDBaseT
technology and supports full resolution HDMI video via one category cable. Also,
embedded EDID, PoH (Power over HDBaseT) and control via RS-232, Ethernet, and
bi-directional IR are fully supported.
The unit has a signal bandwidth of 340MHz, and there is no signal quality loss.
Users can select and distribute HD Digital signals to any eight (8) inputs to
outputs simultaneously (mirrors channel outputs). In addition, digital
audio signals such as Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, and
DTS-HD are supported. The switcher is fully CEC, ARC and HDCP 2.0 compliant,
supporting 3D formats and data rates up to 6.75 Gbps.
The unit can output resolutions UXGA/WUXGA/DVI 1920x1200 to any High Definition
displays. The SB-5688CAP has 1 HDMI and Auxiliary Audio connector for input,
thereby making this an (8) input (16) output switcher. With IR remote, the
switcher's HDBaseT Transmitter (Tx) enables you to connect a source in a remote
Also, the HDBaseT output and Shinybow’s HDBaseT Receiver enables you to connect a
display in a remote location. Select the EDID management between seven (7)
different modes. Controlled via front panel push buttons, RS-232, IR remote, or
TCP/IP (not a web-browser). The unit has an RS-232 Windows Graphical User Interface
for matrix routing control (Windows only).
Zone control with eight individual remote controls offers easy channel selection
based on independent remotes. It also includes one master remote that controls all
source and destination products. The SB-5688CAP is compatible with all HDMI source
units, Plasma HD displays, PC monitors, HDTV and audio receivers or audio