The 1x2 VGA Distribution Amplifier is designed to work as a splitter for VGA Video applications. Capable of splitting a VGA signal from one source to two devices with compatible inputs. A built in amplifier will boost the signal to the needed level, to prevent signal loss and picture degradation. A maximum bandwidth of >1GHz will support a sharp and highly defined video in multiple resolutions of up to 2048 x 2048. The 1 x 2 VGA Distribution Amplifier works with all Video equipment that has proper connections such as Cable and Satellite receivers, and Computers.
Features:
- 1 Input to 2 DA Outputs and 1 Preview Output VGA Distribution Amplifier
- Signal Bandwidth >1GHz
- Low Distortion over Wide Bandwidth
- High resolution up to 2048x2048
- High Output Drive 175 mA Output Load Drive
- Scan rates accepted: 50Hz or 60Hz
- Enclosure type: Support wall mountable
- Size: (6.92")W x (3.15")D x (1")H inches
Specifications:
- Type of Amplifier: 1 input To 2 outputs VGA Distribution Amplifier
- I/O signals: RGBHV, RGBS, RGsB (RGB Level Range 0.5~2.0 Vp-p)
- Video Bandwidth: Large signal 440MHz. small signal(-3dB) 1 GHz
- Slew Rate: 5500 V/as,4V Step, G=+2
- Settling Time: 10 ns to 0.1%, 2 V Step, G=+2
- Gain Flatness: 1.0.1 dB to 75MHz, Rl=150% 2.0.01 differential gain error; Rl=150% 3.0.01 differential phase error;
Rl=1 50%
- Low Distortion SFDR: 1. -66 dBc @ 20 Mhz, Second Harmonic 2. -75 dBc @ 20MHz, Third Harmonic
- High Resolution: Maximum 2048 x 2048
- Amplifier Unit: FCC, CE, RoHS(2002/95/EC)
- Power Supplies: UL, CE, CSA, TUV, BS
- Power distortion: 400 mA full load
- Dimensions: (6.92")W x (3.15")D x (1")H inches
- Power Voltage Input: DC 12V @300mA, ~3A accepted
In the box:
- SB-1102 VGA DA
- Users Guide
- AC/DC Adapter: 12VDC, 300mA