SWIT S-2070 Chip Array LED On-Camera Light

S-2070 is a new light of SWIT Chip Array LED family, with smaller size and lower consumption for hand HD camcorders.
The new generation LED technology, Chip Array LED, integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, non-glaring light, similar to the traditional Halogen bulb light.

Chip Array LED:

S-2070 is a new light of SWIT Chip Array LED family, with smaller size and lower consumption for hand HD camcorders. The new generation LED technology, Chip Array LED, integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, non-glaring light, similar to the traditional Halogen bulb light.

13W Power Consumption, 70W Blub Equivalent

S-2070 requires only 13W power consumption but can output bright light equivalents to an 70W halogen bulb. The illuminance is 800 Lux at 1 meter distance and 1 meter scale.

Compact Size, Ideal for HDV camcorders:

S-2070 is compact size designed, smaller than SWIT S-2041 and S-2050 Chip Array LED light, and more suitable to use on small camcorders. 

60° Wider Beam Angle:

The traditional LED lights use lens to converge and get a higher brightness, but dropped down quickly around, which will generate a visible lighting border in the image. In comparison, the S-2070 Chip Array LED generates a 60° wider beam angle, equally spread from the center to edge, and suitable for HD shooting.

Glareless light, Single Shadow:

The traditional LED array always generates several highlight pots on retina and people will feel glaring, even canft recover sight until a few seconds. In comparison, the SWIT Chip Array LED has only one bulb in appearance, and output a non-glaring, single shadow light, suitable for close interview shooting.

3200K/5000K/5600K Color Temperature:

The S-2070 LED has 5000K color temperature and also equipped with a 5600K (Daylight) and a 3200K (Tungsten) color temperature filter. You can switch the color temperature eas

6-17V Wide Voltage Power Supply:

The S-2070 accepts 6-17V wide voltage input, so you can get power from 14.4V V- mount/Gold Mount batteries or 7.2V DV batteries. The light package goes with a D-tap to pole-tap cable (S-7104), to plug into the DC-IN port of S-2070 and get power from D-tap power output sockets, such as batteries, battery plates, or camera handle. You can also select SWIT pole-tap to pole-tap DC cable (S-7108) to get power from pole- tap DC adaptors. By installing a particular DV battery plate, you can directly mount a 7.2V DV battery onto the rear of the S-2070 light.

Interchangeable DV plates:

You can power the S-2070 by most popular DV batteries, via the easy interchangeable DV battery plates. We supply the following DV plates for optional:

Battery Mount Options:

Power by Special Compact Battery:

By optional purchased battery S-8040
If you want a compact battery power solution, you may choose SWIT S-8040 Li-ion battery to instead of the DV plates and DV batteries. The S-8040 is specially used for SWIT S-2041 and S-2070 lights, with 7.2V, 21Wh/3Ah capacity, and can run nearly 1 hour and 40 minutes on S-2070. The S-8040 has a 4-level power indicators and a pole-tap charging input socket. You can use SWIT portable Pole-tap charger S-3010D to charger S-8040.

Dimmer control:

S-2070 has a dimmer controller to adjust the light output from 10%-100%. The color temperature will not change during the dimmer controlling.

Easy Installation:

Features

• Chip Array LED technology
• 13W, 800Lux @ 1 meter, dimmerable
• 70W equivalent output
• Single shadow, glareless
• 60° wide beam angle, equally spread
• Cool touch
• 5000K color temperature
• 5600K and 3200K filter
• Color rendering index: 85
• 6-17V wide input voltage
• Interchangeable DV mount and battery
• Glass Fiber strong and durable housing
• Screw and cold shoe mount