BZB Express would like to reintroduce the biggest hit of 2010, and the most advanced true 16×16 HDMI switcher by Atlona: ATLONA 16×16:2 HDMI MATRIX SWITCH WITH CAT5/6 AND LOCAL HDMI OUTPUTS WITH 3D SUPPORT. Model: AT-PROHD1616M-SR


The Atlona AT-PROHD1616M-SR is a True 16×16:2 HDMI matrix switch. The PROHD1616M unit features sixteen HDMI 1.3 inputs, and sixteen independently switchable HDMI + Twister Pair outputs to feed sixteen separate displays simultaneously. Each output features 1 x HDMI and 2 x Twisted Pair connections where both are active at the same time. Twisted Pair outputs are used to connect to the 16 x included receiver modules

The AT-PROHD1616M-SR has the ability of equalization, amplification and re-clocking the signal over HDMI to ensure accurate signal transmission through long cables without quality loss. The transmission distance of Twister Pair (CAT5/6) outputs can reach up to 165ft @ 1080P with infrared control signal. Distance can be extended for additional 165ft with an optional Atlona repeater unit AT-PROHD-RP. It is recommended to use CAT6 (568B terminated) wire to get the longer distance.

The Atlona 16×16:2 Matrix can be controlled through : Front Panel Touch Screen, IR Back Channel, RS232, RS485, TCP/IP (LAN) or/and supplied remote control.

Note1: The AT-PROHD1616M-SR comes with 16 x Receiver modules, there is no need to purchase additional hardware

Note2: The AT-PROHD1616M-SR is able to work on a single CAT5/6/7 cable; however special software is required (The IR pass-through will no longer work in this case).


  • 3D Capable
  • Supporting the latest (HDMI1.3) 36 bit deep color standard, it can be connected even to the latest BluRay players, set top boxes, AV receivers or Apple TV.
  • HDCP 1.1 and DVI1.0 compliant
  • Supports high resolution up to 1920×1200 or 1080p over local HDMI or included Twister Pair receiver modules
  • The 16 outputs are capable of displaying the same or different sources simultaneously. Each output includes one HDMI A type connector and a set of dual RJ45 connectors as the second mirrored HDMI output. The two outputs work simultaneously.
  • Supports all latest HDMI audio formats including Dolby TrueHD and DTS-HD
  • EDID management function stores 100 most common EDID recordings with ability of programming new EDID recording by the user
  • Reclocking for both inputs and outputs allows long HDMI cables to be used on both inputs and outputs
  • Supports 6 x control options: Panel buttons, Local IR, IR call back from remote locations, RS232, RS485 and TCP/IP (LAN).
  • IR commands and RS232 commands are provided
  • Use any remote to control the switch, switch is capable of recording any IR commands and user can choose what they mean.
  • Silicon Image Chip-Sets allow 99.99% compatibility with all the AV gear (we only use the best). Silicon Image was a creator of the HDMI standard.
  • Rack Mountable (comes with rack ears)
  • Control4, RTI, Crestron, AMX compatible
  • Easy installation

Technical Specifications:

  • Video Bandwidth: 6.75Gbps
  • Max Resolution : 1080p/1920 x 1200
  • HDTV Formats Supported: 1080P/1080i/720P/576P/480P/576i/480i
  • Audio Format Supported: DTS-HD, Dolby trueHD, 7.1ch and others
  • Max. HDMI Cable Input Distance: 50ft
  • Max. HDMI Cable output Distance: 50ft
  • Max. Twister Pair output Distance 165ft @1080p (optional repeaters are available to add additional 165ft Model is AT-PROHD-RP)
  • Twister Pair Type: CAT5/6/7 (568B termination)
  • Power Consumption: Main Unit: 60wtts (Max); Receiver Unit 100mwtts (Max)
  • Dimensions (Inch): Main Unit:17.32W×13.78H×15.35D Receiver:1.8W×0.8H×3.3D
  • Rack Height: 6U
  • Net Weight: Main Unit: 44.1 LB; Receiver Unit: 0.6LB

Package Includes:

Main Unit:

  • 1 x AT-PROHD1616M-SR
  • 16 x IR emitter cables (marked IR TX),
  • 1 x IR receiver cables (marked IR RX)
  • 1 x USB to RS232 cable
  • 1 x 12VDC Universal Power Supply. (UL Listed)
  • 1 x Rack Mounting ears.
  • 1 x IR Remote.

Receiver Modules:

  • 16 x Receiver Units AT-PROHD1616M-R
  • 16 x IR receiver cables (marked IR RX),
  • 16 x 5VDC power supply (power supply for receiver modules will not be required under normal conditions)
  • 16 x Rack Mounting ears.
  • 1 x Operating Instructions.
  • 1 x CD with RS232 commands and control software.