Atlona’s HDVS family is a new collection of HDBaseT units designed for schools, boardrooms and businesses.

Posted on by Florante Ancheta

Atlona Technologies continues to ride the HDBaseT wave with a new collection. Introducing the HDVS family; designed for simple low-cost systems in schools and businesses.

First up, the AT-HDVS-TX-WP.

This wall plate transmitter offers auto-switching between HDMI and VGA inputs. HDBaseT and power over category cable (PoCc™) allow signal and power to 230 feet (70 meters) over a single category cable.

Input Selection:

Auto-Switch senses when inputs are connected or  powered on/off.

Panel Button allows you to overwrite auto-switch and select the input you want.

3rd Party Control RS-232 connection to allow input control through a control box.

Projector Control allows you to turn on/off from wall plate. Optionally used to mute audio and video.

One Cable No power required at wall plate. Wall plate can be up to 230 feet (70 meters) from display. HDVS wall plates work best with the HDVS receiver/scaler

Up next is the AT-HDVS-RX.

This receiver offers HDBaseT input and a scaled HDMI output (with de-embedded audio). HDBaseT and power over category cable (PoCc™) allow signal and power over a single category cable, with RS-232 control capability.

 

Balanced Analog Audio De-embedded on captive screw connectors. Easily connects to AT-PA100-G2.

Scaler assures compatibility of VGA and HDMI sources to any display. Adjust picture for best results. Configure output of the scaler to match the native resolution of the connected display with resolutions up to 1920×1200 or 1080p (see manual for the full list of resolutions).

RS232 Connection to projector, DB9 adapter included. Included software simplifies programming.

USB Port for firmware update is easily accessible. A few other features include a standy mode if a source is not connected; mute option to turn display on/off and mute output with display button; locking HDMI connector; LED to confirm HDMI and HDBaseT links

Thirdly, Atlona’s AT-HDVS-TX.

This unit switches between two HDMI and VGA/audio inputs, digitizes, and transmits over a single CAT cable via HDBaseT. All the features of the AT-HDVS-TX-WP are available including 2 HDMI inputs, 1 VGA input with audio, and external power. The AT-HDVS-TX is compatible with the AT-HDVS-RX and other Atlona receivers, projectors with HDBaseT inputs, and comes with mounting brackets plus power supply.

So there you have it. All the units listed above are available now. As Atlona continues to push the HDBaseT threshold, we will continue to supply them. Call your local representative for more details or questions at 888-660-2962.