The KD-IP822ENC is a top quality 4K Enterprise AV™ over
IP Decoder from Key Digital. This ideal unit features PoE,
2x IR/RS-232 control ports making it the installers ideal
choice gadget. It is HDCP 2.2 compliant, and it allows for
compatibility with other units or systems, making it a
versatile device every installer should have.
Features:
- Enterprise AV™ Over IP: Utilizes
a managed gigabit network switch to enable video
distribution, matrix switching, and extension
- Inter-System Compatibility: Fully
compatible with KD-IP922ENC and DEC units / systems
- Video Wall Processing: Encoder +
Decoder systems create video walls with up to 4 total
displays. Use KD-IP922DEC for larger video wall
configurations
- Control: 2 multi-function ports may be
used as third-party control interface, Compass Control®
Pro master controller, control extension via IP, or
callable via KeyCode open API
- Key Digital® App Ready: Network
scan & detect populates pre-built GUI including image
preview
- HDCP 2.2: Compliancy up to HDCP 2.2
and backward compliant
- 4K/Ultra HD Resolution: Support for
4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at
4:2:0/8 Bit
- 4K Down-scale: Incoming 4K resolution
can be down-converted to 1080p or 720p at each decoder,
enabling monitors to display content at optimal resolution
at all times
- Signal Extension: Up to 330 ft. / 100
m @ 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or or
point-to-point
- Power over Ethernet: Does not require
power supply when integrated with compatible PoE network
switch
- Redundant Power Connection: Added
reliability for non-PoE integration. Power supply sold
separately
- Data Stream Bandwidth: < 900Mbps
- Latency: <40ms at 4K. Less at lower
resolution.
- Installation: Use KD-SMS16 to cleanly
install up to twelve KD-IP822/ENC/DEC units in rack
- HDMI® and HDCP Licensing: Fully
licensed and compatible with HDCP 2.2 and HDMI latest
technology such as 4K/UHD 4:2:0/8bit at 60 f/s
- EDID Control: Internal library
features 15 default EDID configurations and native EDID
data from Output/Display devices connected to Decoder
- Hot Plug Detection Control: Enables
integrator to choose if active signal voltage is forced to
connected input devices
- Full Buffer System™: Manages
TMDS re-clocking / signal re-generation, HDCP
authentication with source & display, EDID Control
handshake, and Hot Plug control
- IR Sensor: Sensor powering via +5V IR
In port collects line-of-sight IR from remote(s) without
external IR connecting block
- Up/Down IR: Two channels of IR enable
control to/from devices connected to Encoder and Decoder
units
- RS-232: Bi-Directional control to/from
Encoder and Decoder unit on Phoenix connector
- RS-232/TCP-IP Control Mode: Provides
control of unit as well as connectivity status
- Lossless compressed digital audio:
Support for Dolby® TrueHD, Dolby® Digital Plus,
Dolby Atmos®, and DTS-HD Master Audio™
- Control System Support: Controllable
by all IR, RS-232 & TCP/IP supported control systems
via open API: Compass Control® Pro, AMX®,
Control4®, Crestron®, KNX®, RTI®, Savant,
URC®, Leviton® etc.
