This unit consists of HTR Tx/Rx
HDMI Extender Kit and 30m Certified CATx Cable
The PureLink HTR is a transmitter and receiver
set for long distance extension of HDMI video and embedded audio with bi-
directional control signals ( RS-232 and IR) over single CAT 5/6/7- type cable. It
is designed on HDBaseT technology which allows full 3D support with up to 330ft
(100m) at 4K2K (UHD) resolution. A compact and low profile enclosure
makes the HTR ideal for extending HDMI video, embedded multi-channel
audio, bi-directional control signal, and Ethernet to limited space
environment such as behind a flat-panel display.
PureLink HTR is HDCP
compliant and it enables the reliable, long distance extension of HDMI signals,
supporting Deep Color and full 3D and embedded HD lossless audio formats. In
addition, EDID and HDCP communication is being maintained between a source and
display. Also, the HTR includes an RS-232 and IR insertion port, allowing bi-
directional control of an AV device.
- Zero loss & Zero noise delivery of digital high
definition video and audio signal using UTP connection, HTR delivers HD signals
over CAT5/6/7-type cables without loss or digital interference maintaining the
clarity and colors. Noise cancellation and error correction logic enhances HDMI
video and audio signals over long distance.
- Compact and
Robust enclosure design allows for discreet
installation behind a flat-panel display.
- Designed based on
HDBaseT Technology, supporting support Deep Color and full 3D support plus
DTS-HD and Dolby TrueHD over a single low cost CATx interface with up
to 330ft (100m) at Ultra HD (4K) or 1920x1200 resolution.
- Uncompressed high definition video up to 4K2K@30Hz@48bits and 3D.
- Controls signals including bi-directional RS-232 and IR
- Bi-Directional RS232 interface – commands and data can flow in
both directions via RS232, allowing status requests and control of the destination
- Max. Data Rate- 10.2 Gbps.
- HDCP (High-bandwidth Digital
Content Protection) Support.
- HDMI version 1.4 Support.
- Audio transmission support LPCM 7.1@192KHz, Dolby TrueHD, DTS-HD MA.
- Support 10/100Mbps network, allow to connect the network TV or another
- ARC (Audio Return Channel) Support to send audio data
“upsteam” to an A/V receiver or surround audio controller.
Set and Forget
PureLink’s TOTALWIRE™ CX Series High Performance
Cables with End-to-End Shield and lifetime warranty rids
installations of all concerns. The TOTALWIRE CX
strong>design offers a “set and forget” cabling system that effectively delivers
ruggedness, reliability, compliance, and peace of mind to many data-sensitive
applications such as government, gaming, medical, and financial installations.
The TOTALWIRE CX is designed to support 10
Gigabit data transmission including Ultra HD/4K and HDBaseT in high noise
environments. The End-to-End Shield features individually
shielded pairs to ensure minimal crosstalk. The TOTALWIRE CAT-
X is also an ideal companion to
PureLink’s PureMedia and HDTools line of HDBaseT extension
systems for optimum range and performance.
Built to Last
PureLink’s TOTALWIRE CX cables feature a shielded,
solid built connector, ensuring that this critical point is as reliable as any other
point of the cable. The high quality construction of both the cable and plug makes
the TOTALWIRE CX design ideal for high bandwidth signal
transmission including Ultra HD/4K, PoE, and control. The TOTALWIRE CX
strong> is compliant with U/FTP specifications, ISO/IEC11801 shielding, ANSI/
TIA-568-C.2, and outperforms any other cable system in its class for all Ultra HD/4K
and HDBaseT 2.0 applications.
- Quality Construction – shielded connector and 4 shielded twisted pairs
- Lifetime Warranty
- Optimized for HDBaseT Installations
- Available Lengths – pre-terminated lengths up to 330 ft. (100m) /
bulk reels of 1000 ft.
- 1 x HTR Transmitter Module
- 1 x HTR Receiver Module
- 2 x Power adapter
- 1 x User Manual
- 1 x Certified CATx Cable - 30m