SAVE 5% NOW
1.888.660.2962LIVE CHAT

RDL HR-MP2A Dual Microphone Preamplifier

RDL
Authorized Dealer
SKU: HR-MP2A
 
Product Questions? Ask Our Experts!
Market price: $579.35,
Instant savings: $57.93
  • $521.42
  • Brand
    RDL  
  • SKU
    HR-MP2A  
  • Weight
    3.00 lbs  
  • Warranty
    3 Years  
  • Condition
    New  
  • Status
    Available
 

  • Business price:

RDL HR-MP2A Dual Microphone Preamplifier

Warranty! Call Us 888 660 2962
  • Weight
    3 lbs
  • SKU
    HR-MP2A
  • Mnf#/Vendor#
    RDL
The HR-MP2A is a dual channel microphone preamplifier with line-level outputs. Each section provides identical rear-panel signal connections and front-panel controls.

The HR-MP2A is a dual channel microphone preamplifier with line-level outputs. Each section provides identical rear-panel signal connections and front-panel controls.

Each preamplifier is equipped with a front-panel INPUT PAD switch that allows the operator to attenuate the input signal by 15 dB prior to the preamplifier input stage, increasing the maximum input level from +5 dBu (attenuator out) to greater than +20 dBu. A POLARITY switch provides signal polarity reversal if needed. The GAIN control provides continuous adjustment between 20 dB and 60 dB. A CLIP LED flashes if a signal peak is within 3 dB of clipping. The trigger threshold of the CLIP LED is 17 dB above a normal +4 dBu output.

The HR-MP2A offers exceptional input headroom, wide flat frequency response and extremely low noise with very high common-mode signal rejection. Total harmonic distortion and crosstalk are below the noise floor, allowing the HR-MP2A to be operated as a stereo preamplifier or as two separate mono preamplifiers.

Each preamplifier provides two balanced line-level output formats: Detachable terminal block and ¼" TRS. A separate summing amplifier provides a combined mono output on a line-level detachable terminal block. Balanced outputs may be wired unbalanced. The rear panel also provides a detachable terminal block and a power input jack to connect 24 Vdc power.

The HR-MP2A is constructed in a durable half-rack-width shielded metal enclosure for free-standing use or for mounting in an RDL rack adapter, available separately.

Features:

  • Two Independent Microphone Preamplifiers
  • Balanced XLR Microphone Inputs
  • Independent Controls for Each Preamplifier
  • Front-Panel 20 to 60 dB Gain Control
  • Switch-selectable 48 Volt Phantom
  • Switch-Selectable 15 dB Input Pad
  • Switch-Selectable Polarity Reversal
  • Switch-selectable 48 Volt Phantom for Both Preamplifiers
  • CLIP Indicators for Peaks 3 dB Below Clipping
  • Balanced Line-Level Outputs
  • Each Output Allows Balanced or Unbalanced Connection
  • Each Preamp Output on ¼" TRS or Detachable Terminal Block
  • Separate Summed Output 1 + 2 on Detachable Terminal Block
  • Brand
    RDL  
  • SKU
    HR-MP2A  
  • Weight
    3.00 lbs  
  • Warranty
    3 Years  
  • Condition
    New  
  • Status
    Available
 
Related products