The KanexPro one input over one output HDMI Extender is designed to carry DVI/ HDMI signals over distances beyond the capability of standard HDMI/ DVI cable. It extends video and audio over a single CAT5e/6 cable up to 165ft. (50m) and is compliant with EDID.
In addition, the extender provides auto-adjustment, buffering and signal equalization to maintain pixel-perfect resolution up to HD 1080p/60 depending on the RJ-45 run. To attain full HD 1080p the distance has to be shorter than 100ft. Ideal for relocating your source such as a Blu-ray player or a satellite box to a remotely located display.
Do not use couplers between the RJ-45/ CAT6 cables, this will cause degradation. To reduce video dropout problems from lightings, ceiling fans and other EMI issues, it is strongly recommended that you terminate shielded CAT5e/CAT6 and use shielded RJ45 connectors with our extender products. "EZ end" connectors are not recommended for use with HDMI extenders.
- Extend DVI/HDMI over Cat5e/6 cables up to 165 ft. (50m)
- Supports data rates up to 1.65 Gbps per channel
- Supports full HD 1080p (1920x1080@60Hz)
- Digital audio support through HDMI
- EDID compliant
- Supports 8 bit per channel (24 bit all channel)
- Under the desk or rack mountable
- Easy to install
Note: Both units are powered and are supplied with 5V AC adapters.
- Transmitter x1
- Receiver x1
- 5V DC Power Supply x2
- Wideband IR TX cable x1
- Wideband IR RX cable x1
- Manual x1