Intended Use(s): Home Theater | Computer A/V | Digital Signage
Extend HDMI over a single CAT6 cable -- with support for HDMI 1.3
The Gefen Extender for HDMI 1.3 over one CAT6 will send a 1080p/60Hz HDMI 1.3 signal, with Deep Color support, over a single CAT-6a cable to distances of up to 130 feet (40m). HDMI 1.2 is still fully supported and can be extended up to 150 feet (50m) at 1080p/60Hz and 200 feet (60m) at 1080i/60Hz. Extension of high definition can now be simplified with the use of only a single CAT-6a cable. Previous solutions used 2 cables to accomplish this.
The Gefen Extender for HDMI 1.3 over one CAT6 supports the HDMI 1.3 specification with features such as Deep Color, Full 1080p HD and compressed lossless audio formats such as Dolby TrueHD and DTS-HD Master Audio.
The extender's pure digital transmission method insures 100% signal integrity over this single cable extension solution.
How It Works
The Gefen Extender for HDMI 1.3 over one CAT6 system consists of send and receive units. The HDMI source (set-top box, DVD player, or gaming console) connects to the sender unit with the supplied 6-foot HDMI cable. The receiver unit connects to an HDTV display in the same manner. One CAT-6a cable will link the sending and receiving unit together at distances of 130 feet. Power is applied to both the sender and receiver with the included 5V DC power supplies. A perfect image is now displayed on the HDTV display at the extended location. Note: This device is an HDCP pass-through device. HDMI 1.3 Features Supported:
- Dolby TrueHD & DTS-HD Master Audio
- Deep Color Supported (x.v.Color)
- 225 MHz (up to 12 bit YUV 444 @ 1080p)
- CEC Protocol Pass Through
- Lip-Sync Pass Through