This listing is for DB-RC3M Controller only.
Use description below as a general reference.
The D-RC type remote audio mixing controls provide user-accessible volume knobs
for two or three sources. Each control is available with level controls only, or
with level controls plus a muting button for each channel. They function exactly as
a mixer without the need to send audio to and from the remote location. A rear-panel
RJ45 jack provides the connection for standard twisted-pair wiring between the
remote control and an RDL remote-controlled mixer. The cable sends the knob position
and muting status data to the mixer. All audio signals remain local to the mixer
which uses VCA technology to set the mixer levels. A long life 10 kO potentiometer
is used in the control for setting the VCA voltage. Muting models provide a MUTE
button for each mixer channel that alternately mutes or un-mutes the audio. An LED
MUTE indicator glows red when the signal is muted and turns green when the audio
channel is active. Each model is offered in a standard RDL white front panel or in
stainless steel with custom lettering available. These finishes match other RDL
remote selectors and jack plates for a visually appealing installation of multiple
controls.
Features
- Three Channel Remote Audio Mixing Control Panel
- Single-Turn Rotary Controls
- Single Control Location
- Direct Control of RDL Mixers with an RJ45 Remote Control Port
- Standard Twisted-Pair Interconnection to Mixer
- Mute Button Toggles Output On and Of
- Red/Green On/Off Mute Indicator
- Color: Black