Atlona Passive VGA Wall Plate Extender up to 330ft over 1 x CAT5/6/7
Cable (RECEIVER ONLY). Model: AT-WPVGA-R
The Atlona passive VGA
wall plate receiver unit allows sending a perfect video
signal over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to
1280x1024. These extenders can be mixed and matched with each other. The wall plate
transmitter can be matched with “box” receiver and the other way around
and of course, the wall plate transmitter will perfectly work with wall plate
receiver and “box” transmitter with “box” receiver.
Plug and Play, no drivers or software needed, user will not even notice the
difference when using an extender versus a direct connection. The extenders require
no external power.
Note: The AT-WPVGA-R is only a receiver unit, the
transmitter is required (AT-WPVGA-S or AT-VGA100S)
Combinations are below:
The VGA Extenders are a great solution for many different applications, e.g.,
classroom, office environment, data-center, training room and many others where the
computer must be placed further away from the users display.
Dili> 800x600 pixels (30MHz) – 320ft 1024x768 pixels (60MHz)
– 250ft 1280x1024 pixels (100MHz) – 200ft
- Extend signals up to 330ft away from
the computer on a single low-cost Cat5, 6 or 7 cables.
- No power supplies
- Perfect for extending VGA signal further away than standard
cables may allows.
- Wall plate transmitter is compatible with
“box” receiver and other way around.
- Resolution support up to
- Plug and Play, no drivers or software needed
computer is compatible, no limitations