RapidRun Optical is our leanest-longest, fastest-strongest RapidRun product yet!
Designed to be the standard for in-wall HDMI audio/video installations, it boasts
an 18Gbps bandwidth, a diameter of just a half inch and a plenum rated jacket.
Using pre-terminated break-away flying leads and wall plates with an in-wall runner
provides a flexible, efficient, high quality connection for all types of equipment,
with no field terminations. Utilize this Plenum, OFNP-Rated fiber runner cable for
in-wall installations that require the cable to be run through an air handling
space or air plenum. This RapidRun solution supports up to a 4k resolution, while
providing enough bandwidth to serve the audio/video needs of commercial
applications from classrooms to lecture halls and auditoriums to boardrooms for
years to come.
Note: Some HDMI source devices are unable to output the power
required to send A/V signals over the Optical runner cable which results in no
image being displayed. In those instances, an HDMI Voltage Inserter (42223 or
42236) may be required. Each complete RapidRun Optical solution requires a
break-away flying lead or wall plate to terminate each end of the runner cable.
Each runner requires (2) break-away flying leads OR (1) wall plate and (1)
break-away flying lead. RapidRun Optical Runners require the flying leads and/or
wall plates in order to function properly. The Runner cables cannot be used to
connect directly to source/display devices. RapidRun Optical Runners are
directional cables that require the TX to be installed at the source side and the
RX to be installed at the display side. RapidRun Optical Fiber Pulling Eye sold
- Supports full 1080p, 4k, and 3D HDMI features
- Utilizes fiber cabling, so it is resistant to EMI/RFI interference
- Powered with USB at the display side (RX)
- Length - 750ft